McQuay MDS080BR Installation Guide Page 28
- Page / 116
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
-28-
Design & installation Guide For McQuay MDS Multi System
2.3 Operation of the Controller
2.3.1 Main Features
Both wired controller (using the key on board) and remote controller (equipped with infrared receiver to
receive the order from the remote controller ) to control the unit, and to perform such functions as param-
eter setting, working mode setting, status display and malfunction indicating.
Features:
Working mode:
Cooling only unit: Cooling/air supply/dehumidity;
Heat pump unit: Cooling/heating/air supply/dehumidity.
Indoor units have several speed: Auto/ Low/ Medium/ High.
Temperature setting range: 16 /61
o
F 30 /78
o
F.
Timer for ON/OFF. Max. time is 24 hours.
Sleep.
Auxiliary electric heater & hot water heater control and the wind wing function.
LCD indicator is available to slow the setting temperature, working mode, real time, week, and
status of the units.
2.3.2 Operation of the Wired Controller
Buttons on the wired controller panel
POWER
RUN
Reset button
Fan Mode
Sleep
Heating/
wind wing
CLK button
Timer
Te m perature
ON/OFF
LCD
vision window
Operation manual
The omitted parameter
When the function of auto restart after power failure is not active: The unit is OFF and the
temp is 24 /75
o
F cooling mode, high speed, no sleep function, no defrost, no wind wing,
no electric heater.
When the function of auto restart after power failure is active: the unit is the same as that
before power failure.
Temp setting
In normal mode condition, press
or to increase or reduce the temp by 1 or 1
o
F.
Temp adjustment range is 16-30
(or 61-86
o
F). When the temp reach the upper limit or floor
limit, the
or is invalid.
- CONTENTS 3
- Overview 4
- MDS080BR MDS100BR MDS120BR 7
- MDS150BR 7
- MDS200BR MDS220BR MDS240BR 8
- MDS180BR 8
- MDS280BR MDS300BR 9
- MDS260BR 9
- 1.3 Main Features 10
- Nominal capacity 11
- 100% operating 11
- 1.4 Nomenclature 12
- 1.5 Products Series 14
- 1.6 Performance Parameter 15
- 1.6.3 Ceiling Cassette 16
- 1.7 Operating Range 19
- 1.8 Refnet 19
- 1.8.2 C Type 20
- 1.9 Outline of Indoor Units 21
- 1.9.2 MDB050T 22
- 1.9.3 MDB060T 22
- 1.9.5 MCM020T MCM030T MCM050T 23
- 1.9.6 Auxiliary Heating Coil 24
- 1.10 Outline of Outdoor Units 25
- Unit Control 27
- Te m perature 28
- 2.3.3 Wire Control Panel 31
- 2.3.4 Outline and Dimension 31
- 2.3.5 Installation Type 31
- concealed installation 31
- 2.5 Network Central Control 34
- 2.6 Wiring Diagram 35
- Model MCK025/030/040/050T 36
- MCM020/030T 36
- Model MCM050T 37
- Model MDB050/060T 37
- Model MDS030A 38
- Model MDS030AR 38
- Model MDS040AR 39
- Model MDS040A 39
- Model MDS050A 40
- Model MDS050AR(220V~/50Hz) 40
- Model MDS060A 41
- Model MDS060AR(220V~/50Hz) 42
- Model MDS080/100/120B 43
- Model MDS080/100/120BR 43
- Model MDS150B 44
- Model MDS150BR 44
- Model MDS180B 45
- Model MDS180BR 45
- Model MDS200/220/240B 46
- Model MDS200/220/240BR 46
- Model MDS260BR(Master Unit) 47
- Connecting the master unit 48
- 2.7 Electric Connection 49
- 2.7.3 MDS080 240B/BR 50
- 2.7.4 MDS260 300B/BR 50
- 2.8 Electric Data 51
- Selection 52
- 3.2 Selection of Indoor Units 54
- Correction factor 57
- 3.4 Design of Air System 58
- 3.5 Slection of Refnet Joint 63
- For MDS-A series 64
- For MDS-B series 64
- Y type 65
- Type: MDS-Y5 65
- 3.6 Selection of E-EXV Box 66
- Installation 67
- Suspension ropes 68
- Protective pads 68
- (2 ropes) 68
- 4.2 Indoor Unit Installation 70
- (machine dimension) 820mm 73
- PULL PULL PULL PULL 76
- Height between indoor 78
- Refnet joint 80
- Outdoor unit 80
- Distributor kit 80
- Controller 81
- Indoor unit 81
- To indoor unit 82
- To outdoor unit 82
- Moisture 83
- Blind plug(copper) 84
- Flare fitting 84
- Avoid wielding too often 85
- Work flow 86
- NO.1 NO.2 87
- 6.4mm~25.4mm 10mm or more 88
- 28.6mm~38.1mm 15mm or more 88
- Unit: mm 89
- Absolute pressure 91
- Surface pressure (kg/cm 91
- Ordinary vacuum drying 92
- Special vacuum drying 93
- 30 or more 96
- Pipe mouth facing downward 96
- Air vent pipe 96
- Air vent device 97
- 5.1.1 MDS Series Indoor Units 98
- Model 1 setting (SW1.1 SW1.6) 98
- Address settings (SW2.1 99
- Model 2 setting 100
- SW3.5 SW3.8 100
- Power setting SW3.1 SW3.4 100
- Reserve 100
- Digital control 102
- 5.2 Trial Run 105
- Servicing and Maintenance 106
- 6.2 Servicing and Maintenance 107
- For example: 112
- WWW.MCQUAY.COM 116
Related products and manuals for Split-system air conditioners McQuay MDS080BR
(54 pages)© 2020, manymanuals.com. All rights reserved. | 1.369 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals