McQuay MWM Specifications download pdf (Page 15)

Application Information MWM-J_(ii)

Caution

Before installing the unit, ensure that the power supply matches the power requirement of the air conditioner.

Installation of Indoor Unit

Service Space

Install the indoor unit at a location with the following requirements

• Location is suitable for wiring, piping and drainage.

• No obstruction of air ﬂ ow into and out of unit where cooler air can be evenly distributed.

• Ensure that air discharge is not short circuited with air intake.

• Ensure that wall is sufﬁ ciently strong, rigid, ﬂ at, perpendicular and vibration free.

• Where air ﬁ lter cassette can be slided in or out easily.

• Where there is no danger of ﬂ ammable gases.

• Where there is no direct sunlight on unit.

min. 50

(Space for

maintenance)

Air flow

(Indoor)

min. 50

(Space for

maintenance)

03 .nim

rof ecapS(

)ecnamrofrep

Required space

Installation Clearance

• Outdoor units must be installed such that there is no short circuit of the hot discharge air or obstruction to

smooth air ﬂ ow. Select the coolest possible place where intake air should not be hotter than the outside

temperature (max. 45˚C).

ALL MODELS A B C D

Minimum Distance 300 mm 1000 mm 300 mm 500 mm

CAUTION : If the condensing unit is operated in an atmosphere containing oils (including machine oils), salt (coastal area),

sulphide gas (near hot spring, oil reﬁ nery plant), such substances may lead to failure of the unit.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 89 90

No comments

McQuay MWM Specifications Page 15