McQuay MWM Specifications download pdf (Page 18)

MWM-J-2011 Application Information

Routing of Piping

The refrigerant piping can be routed to the unit in one of 5 directions, by using the cut outs in the unit

casing (refer to Figure 1).

Figure 1

Carefully bend the pipes to the required position to align with the hole. For right hand and rear side draw

out, hold the bottom of the piping and ﬁ x direction before shaping it to the desired position

(refer to Figure 2).

Right & Rear Side Routing

Right-back piping

Bind coolant pipe

and drain hose

together with

insulating tape.

Right-bottom

piping

Remove pipe port cover

here for right-bottom piping

Right-side

piping

Remove pipe port cover

here for right-side piping

Remove pipe port cover here for

left-bottom piping

Remove pipe port

cover here for

left-side piping

Left-back

piping

Left-side

piping

Left-bottom piping

Figure 2

Mounting Installation Plate

Paste the installation plan provided on the desired location on the wall and marks the holes location

accordingly.

Ensure the wall is strong enough to withstand the weight of the unit. Otherwise, it is necessary to reinforce

the wall with plates, beams or pillars.

Ensure the levelness of the installation plate, and ﬁ x with 5 suitable screws for M(5)WM09/10/15J/JR and 7

suitable screws for MWM20/25J/JR.

Mounting plate

fixing screw

•

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 98 99

Comments to this Manuals

No comments

McQuay MWM Specifications Page 18

Comments to this Manuals

Related products and manuals for Split-system air conditioners McQuay MWM